Home     Contact     Sitemap
        
  Support
Knowledge Base Search Results

  You searched for:  

RESULTS:

DQ001: How can I edit an existing assay protocol?
How To: Edit an existing assay protocol…

DQ002: Is it possible to convert a protocol that imports data (offline) to a measurement protocol (online)?
How To: Convert an offline protocol to online…

DQ003: A message reporting a problem with scrrun.dll is displayed during installation.
Error message: scrrun.dll is displayed during installation

DQ004: How can I export my data into Excel 97?
How To: Export to Excel 97…

DQ005: I need to number my groups non-sequentially.
How To: Use non-sequential numbering schemes for samples…

DQ006: Where are user data files stored?
How To: Locate user data files.

DQ007: Can I change where user files are stored?
How To: Change the location of user files…

DQ008: I receive a warning message about wtypes.dat file?
Error Message: wtypes.dat

DQ009: I want to edit/print out a graph from the software.
How To: Copy an image to the clipboard …

DQ010: My Cubic Spline has a kink in it
How To: Use Cubic Spline with non-linear data…

DQ011: How can I run an HTS assay which reads more than one plate?
How To: Run an assay over multiple plates…

DQ012: What is the difference between offline and online modes?
Definition: Online and Offline

DQ013: What is a transform?
Definition: Transform

DQ014: What is an Assay Protocol?
Definition: Assay Protocol

DQ015: What’s stored in the Assay Results?
Definition: Assay Results

DQ016: What is the Microplate Layout?
Definition: Microplate Layout

DQ017: Can I use data from my Fluostar instrument?
How To: Import Data from a Fluostar.

DQ018: Can I modify my raw data based on its relation to a calibrator?
How To: Modify raw data conditionally with a calibrator…

DQ019: Genomic DNA Fluorescent Example
Application Example: Nematodic Worm

DQ020: Can I see the individual kinetic data points?
How To: See the individual kinetic data points…

DQ021: Can I separate the data on VICTOR plate repeat measurement into different files?
How to: Separate the data on plate repeat measurement into different files…

DQ022: What does "[locked]" mean with the VICTOR/EnVision data acquisition methods?
Definition: Locked VICTOR/EnVision files.

DQ023: Can I extrapolate with the Cubic Spline?
How to: Allow/disallow extrapolation with a Cubic Spline…

DQ024: Why are the MSE and SS of my Cubic Spline large?
How is the MSE and SS of Cubic Spline calculated?

DQ025: NDProxy.sys could not be loaded message is displayed after installation.
Error: NDProxy.sys could not be loaded

DQ026: Ambiguity between decimal separator and list separator
How to: Specify fractional numbers in a list when working in a locale with a , decimal separator…

DQ027: Problem importing sample import files
How to: Import sample import files in non US/UK locales…

DQ028: I’m having trouble using Manta with my Lucy (L1Win.exe).
Error Message: The parameter is incorrect.

DQ029: I cannot start the Wallac 1420 Instrument Server
Error Message: The Wallac 1420 Instrument Server can not be started.

DQ030: Creating a new microplate layout from Organiser crashes.
Error Message: Run time error 5. Invalid procedure call or argument

DQ031: Multi-wavelength Cellular Kinetic Example
Application Example: Kinetic Ratio Calculation

DQ032: How do I use the changes I have made to the result analysis in future runs of the assay?
How To: Extract a version of the protocol for use in the future…

DQ033: Importing Multiple-plate data
How To: Import Multiple Plate Data…

DQ034: Can I see the plate number of each sample in the report?
How To: Add a plate number column to the table report…

DQ035: I have read many kinetic cycles but I only want to use a sub-set of them in the analysis.
How To: Specify a range of kinetic points to use in the analysis…

DQ036: I have read many kinetic cycles but I only want to display a sub-set of them in the graph.
How To: Display only a subset of the kinetic points on the graph.

DQ037: Can I view overlaid kinetic graphs?
How To: Overlay kinetic graphs

DQ038: Which file should I use to install the software on my PC?
How To: Install the application from the CD.

DQ039: Can I import data from previous VICTOR runs into WorkOut?
How To: Import data from previous VICTOR runs into WorkOut?

DQ040: What is the quickest way to take measurements now?
How to: Take measurements with an instrument now and setup some analysis afterwards…

DQ041: How do I create an offline assay protocol?
How to: Import data from an existing text file and then analyse it…

DQ042: Can I automate the import process?
How to: Import text files as part of an automated process

DQ043: How do I create a typical online assay protocol?
How to: Take measurements with an instrument for a typical assay that will be used routinely

DQ044: How do I use an existing assay protocol to import other data files?
How to: Import other data files with an existing Assay Protocol

DQ045: Can I use my assay protocol as part of an automated process?
How to: Automatically start measurements, perform analysis and export results as part of an automated process

DQ046: Can I run assays across multiple plates?
How to: Use a compatible stacker system to run assays across multiple microplates

DQ047: Can I use settings in one protocol as a basis for another?
How to: Create a protocol based on an existing protocol

DQ048: Can I tweak the analyses used in existing results?
How to: Change the analysis settings in existing results

DQ049: Can I re-evaluate my existing results with a completely different method?
How to: Re-evaluate my results using a different method

DQ050: Can I launch the software from the command line?
How To: Launch the software from the command line.

DQ051: Problems with Cubic Spline in WorkOut 1.5
I am getting strange results for extrapolated points with the Cubic Spline.

DQ052: GFP Kinetics Assay
Application Example: Determine the delta values (difference between a baseline and kinetic measurement at a specified point)

DQ053: Problem with dongle on XP SP2/SP3
Dongle not recognised on Windows XP SP2/SP3

DQ054: Can I use a standard curve from one plate on other plates read in the same batch?
Application Example: RIA on Multiple plates.

DQ055: The CD launcher has a few aesthetic problems on NT
How To: Fix aesthetic problems in CD launcher on NT

DQ056: I do not get any results when I read one kinetic point in VICTOR
Why can’t I see any results with a kinetic read of 1 point?

DQ057: How can I set-up a %B/B0 assay?
Application Example: Prostaglandin Assay

DQ058: How can I blank correct my samples?
How To: Setup blank correction…

DQ059: How To: Calculate the half maximum activity point of kinetic data?
How To: Calculate the half maximum activity point of kinetic data?

DQ060: Is there a way to average replicates and show them on one kinetic graph?
How To: Calculate average kinetic graphs?

DQ061: Can I show positive reactors from kinetic graphs?
Application Example: Positive Kinetic Reactors

DQ062: Can I combine kinetic data measured from two different VICTOR steps into one?
Application Example: Cell-based membrane potential assay

DQ063: Problem exporting to Excel
Error message: Cannot find Excel

DQ064: Problem with WorkOut 1.5 on non-administrator account
How To: Use WorkOut 1.5 on account without administrator privileges

DQ065: Which curve fit should I use?
How To: Choose a curve fit method...

DQ066: SETUP.EXE installation fails with Scripting Runtime error message.
Error message: 1607: Unable to install InstallShield Scripting Runtime

DQ067: My wtypes.dat file is corrupted.
Error message: wtypes.dat is corrupted

DQ068: Erythrophagocytosis Assay
Application Example: Chemiluminescence Assay for Erythrophagocytosis

DQ069: Can I run one VICTOR protocol after another within the same assay?
How To: Link VICTOR protocols

DQ070: Can I launch WorkOut 2.0 for measurements made by WorkOut 1.5?
How To: Launch WorkOut 2.0 from WorkOut 1.5

DQ071: My data file cannot be imported
How To: Import data the wizard does not recognise…

DQ072: Can I specify dilution factors in WorkOut 1.5
How To: Specify dilution factors in WorkOut 1.5

DQ073: What is R²?
What is R²?

DQ074: What is SS?
What is SS?

DQ075: Problem with non-administrator accounts on Windows XP.
Error Message: “Cannot find Victor Installation” and “An error occurred accessing the Workout path”

DQ076: The corrected mP value is not calculated correctly for Fluorescent Polarisation
How To: Set-up a Fluorescent Polarisation with corrected mP

DQ077: How can I see the mP during Fluorescent Polarisation measurements?
How can I see the mP during Fluorescent Polarisation measurements?

DQ078: Cannot start software. Error Message: “You do not have an appropriate license to use this functionality”
Error Message: “You do not have an appropriate license to use this functionality”

DQ079: How can I use WorkOut 2.5 with EnVision (offline)?
How To: Use WorkOut 2.5 to process measurements made with EnVision

DQ080: It keeps asking me to register the product but I cannot.
How To: Stop being prompted to register the software.

DQ081: I get the message “No instrument drivers are installed” when I try to create a protocol with my VICTOR.
Error Message: “No instrument drivers are installed”

DQ082: How do I setup Manta to work with the Lucy 2.0?
How To: Setup Manta to work with the Lucy 2.0.

DQ083: Occasionally there is a small error in large numbers reported by WorkOut 1.5
Occasionally there is a small error in large numbers reported by WorkOut 1.5

DQ084: I get the error message: “MSXML Parser 3.0 is required”
Error Message: “MSXML Parser 3.0 is required”

DQ085: I get the error message: “The dongle product ID does not match the installed product.”
Error Message: “The dongle product ID does not match the installed product.”

DQ086: Results from renamed protocols are stored under the wrong filename and directory.
Results from renamed protocols are stored under the wrong filename and directory.

DQ087: Why are some of my wells automatically flagged (I am using four-parameter fit)?
Why are some of my wells automatically flagged (I am using four-parameter fit)?

DQ088: Can I use WorkOut 2.0 with version 2.0 of the Wallac Manager software?
Can I use WorkOut 2.0 with version 2.0 of the Wallac Manager software?

DQ089: I can’t find my VICTOR results in the Wallac 1420 manager for measurements started by WorkOut.
How To: Retrieve results stored in the VICTOR database for measurements initiated by WorkOut?

DQ090: Unable to open or use any existing protocols for taking readings with the VICTOR
Error Message: “Protocol (num. 900XXX) database contains no labels”

DQ091: Problem with VICTOR and multiple kinetic measurements when reading by wells with a different number of cycles
Problem with VICTOR and multiple kinetic measurements when reading by wells with a different number of cycles

DQ092: Where is the point-to-point curve fit option in WorkOut 2.0?
How To: Point-to-point curve fit in WorkOut 2.0

DQ093: How To: Setup a % absorbance calculation by row
How To: Setup a % absorbance calculation by row

DQ094: When I try to launch WorkOut 1.5, I get the error message: “Cannot start the Victor 2 server. Ensure the Wallac 1420 Instrument server is installed. Do you want to continue running WorkOut offline, without Victor 2?” followed by “Invalid User File”
Error Message: “Cannot start the Victor 2 server. Ensure the Wallac 1420 Instrument server is installed. Do you want to continue running WorkOut offline, without Victor 2?” followed by “Invalid User File”

DQ095: Can I transfer VICTOR WorkOut 1.5 protocols created on one PC to another?
How To: Transfer VICTOR WorkOut 1.5 protocols from one PC to another.

DQ096: Can I transfer VICTOR WorkOut 2.x protocols created on one PC to another?
How To: Transfer VICTOR WorkOut 2.x protocols from one PC to another.

DQ097: The Open in Word/Open in Excel buttons are not available.
How To: Enable Open in Word/Open in Excel buttons.

DQ098: How Can WorkOut 2.x be used with LIMS?
How To: Use WorkOut 2.x with a LIMS?

DQ099: How Can Sample IDs be specified?
How To: Specify Sample IDs.

DQ100: Can I calculate the % differences between the concentrations calculated from the curve against the specified concentrations for the standard data points?
How To: Show the % differences between the concentrations calculated from the curve against the specified concentrations for the standard data points.

DQ101: How do I find which version of the software I am using?
How To: Find which version of the software is in use.

DQ102: The software crashes when editing the Dilution Factors on Windows 98.
Error Message: “MRunRes caused an invalid page fault in module Transforms.dll” when editing the Dilution Factors on Windows 98.

DQ103: Is there a way to change the %CV to the %CV of the raw readings rather than of the concentrations?
How to: Change how the %CV is calculated.

DQ104: I have a Lucy 1.0, which operating system can I run your software with?
Lucy 1.0 compatibility

DQ105: Center for Disease Control (CDC) West Nile Virus (WNV) IgM Protocol
How to setup: Center for Disease Control (CDC) West Nile Virus (WNV) IgM Protocol

DQ106: Salivary Secretory IgA Indirect Enzyme Immunoassay Kit
How to setup: Salivary Secretory IgA Indirect Enzyme Immunoassay Kit

DQ107: Can I include the date and time on every page of the report?
How To: Include the Date and Time on every page of the report.

DQ108: What is the best way to learn how to get started with WorkOut 2.0?
How to: learn how to get started with WorkOut 2.0?

DQ109: What is the consequence of selecting “Scale Y axis to B/B0 using”?
What is the consequence of selecting “Scale Y axis to B/B0 using”?

DQ110: Can I change the Delta Y transform so it subtracts the starting Y value from the ending Y value?
How To: Change the Delta Y transform so it subtracts the starting Y value from the ending Y value?

DQ111: The software shows me the Vmax value but how can I find the Km value?
How To: Find the Km value from an Enzyme Kinetics assay or Group Vmax transform.

DQ112: How can I use transformation from several different wizards?
How To: Setup Transforms

DQ113: Quantitative Nucleic Acid (dsDNA, ssDNA, RNA) concentrations for dual measurements (e.g. 260nm/280nm)
How To: Setup a protocol for Quantitative Nucleic Acid (dsDNA, ssDNA, RNA) concentrations for dual measurements (e.g. 260nm/280nm)

DQ114: How can I get WorkOut to launch automatically when the VICTOR has finished measurements?
How To: Launch WorkOut from VICTOR after measurements have completed (offline mode)

DQ115: Can the files for my multiple plate VICTOR assays be exported by individual plate?
How To: Export the data from a multiple plate VICTOR assay into separate individual plate files?

DQ116: Is a Logit-log fit available?
Is a Logit-log fit available?

DQ117: Which curve fits are available in WorkOut 2.0?
Which curve fits are available in WorkOut 2.0?

DQ118: The software crashes on File | Save Protocol after entering an invalid filename and then saving.
Error: MRunRes crash on File | Save Protocol after entering an invalid filename and then saving.

DQ119: I want to run a Quantitative assay with the standards measured on every plate, but each time I run the assay I change the number of samples and hence the number of plates required.
How To: Create a Quantitative assay which will use a variable number of samples and plates with the concentrations calculated using each plate’s own standards.

DQ120: I want to run a Quantitative assay with the standards measured in a different location on each plate read.
How To: Create a Quantitative assay with the standards in a different place on each plate and with the concentrations calculated using each plate’s own standards.

DQ121: Curve fit display in the report does not match results in WorkOut 1.5
Curve fit display in the report does not match results in WorkOut 1.5

DQ122: I find differences in the fit results for four/five parameter fit between WorkOut and other systems.
Explanation: Differences in the fit results for four/five parameter fit between WorkOut and other systems.

DQ123: WorkOut Results files are stored in the wrong directory when using a login containing a period “.”
Problem: WorkOut Results files are stored in the wrong directory when using a login containing a period “.”

DQ124: Using WorkOut 2.0 with SMS 2000 LIMS
How To: Integrate WorkOut 2.0 with SMS 2000 LIMS

DQ125: How To: Find the R² of the linear fits in Enzyme Kinetics.
How To: Find the R² of the linear fits in Enzyme Kinetics.

DQ126: How can I setup a LAL type assay?
How To: Use the slope from kinetic reduction in quantitative standard curve fit?

DQ127: How are the concentrations calculated for the exponential fit?
What is the formula used for calculating the concentrations from the standard curve?

DQ128: How can I calculate the mean of the replicates?
How To: Calculate the mean of replicates

DQ129: The Dilution Factors table is truncated when printed from Word.
Problem: The Dilution Factors table is truncated when printed from Word.

DQ130: How can I setup Spike Recovery?
How To: Calculate the recovery of endotoxin spikes for LAL assays.

DQ131: The fit is successful but all points are marked as excluded
Problem: For certain fits all points are marked as excluded when using the Log/Anti Log Y setting

DQ132: Where is the “Kinetic Difference” transform in WorkOut 2.0?
How to: Use the “Kinetic Difference” transform in WorkOut 2.0

DQ133: How can I create my own export file structure using a specific directory for different protocols and naming the files by date and time?
How to: Specify a file structure to export which includes a specific directory and the date and time marcos.

DQ134: Stingray/WorkOut 1.5 Dongle Problem
Stingray/WorkOut 1.5 Dongle Problem

DQ135: WorkOut 1.5 crashes when I try to run a protocol, it has been working fine without any problems until now.
Problem: WorkOut 1.5 crashes when I try to run a protocol, it has been working fine without any problems until now.

DQ136: “Please wait while Windows configures…” displays when using the software from an account other than the administrator.
Problem: “Please wait while Windows configures…” displays when using the software from an account other than the administrator.

DQ137: Missing images in Word document
Missing images in Word document

DQ138: During installation the error message: “Error 1904 module fileview.ocx failed to register” is displayed
Error message: “Error 1904 module fileview.ocx failed to register”

DQ139: Is the latest release of Workout 2.0 compatible with the current VICTOR Workstation with the enhanced security option?
Is the latest release of Workout 2.0 compatible with the current VICTOR Workstation with the enhanced security option?

DQ140: How can I set the number of digits to display after the decimal points?
How To: Specify Numerical Formatting Options?

DQ141: How do I upgrade from WorkOut 1.x to WorkOut 2.x
What is the upgrade procedure?

DQ142: Can I smooth my kinetic measurements?
How To: Smooth my kinetic measurements

DQ143: How to get raw kinetic data exported to Excel
How To: Get Raw Kinetic data into Excel.

DQ144: I’ve exported my data to Excel but all my raw kinetic data for each well is all in one cell
How To: Separate exported raw kinetic data into separate Excel cells

DQ145: How do I exclude a standard from a data set?
How To: Flag a point

DQ146: How to use a WorkOut 2.0 upgrade dongle on a PC without a parallel port?
How to use a WorkOut 2.0 upgrade dongle on a PC without a parallel port?

DQ147: How does WorkOut calculate the Integral/area under the kinetic chart?
How does WorkOut calculate the Integral/area under the kinetic chart?

DQ148: Is it possible to force the calculated standard curve to go through (0,0)?
How To: Force the calculated standard curve to go through (0,0)

DQ149: How to have two standards in the same well?
How To: Have two standards in the same well.

DQ150: What are MHT files?
What are MHT files?

DQ151: How To: Setup Chromo-Lal Limulus Amebocyte Lysate assay
How To: Setup Chromo-Lal Limulus Amebocyte Lysate assay

DQ152: Where can I find out about the formulas for the curve fits? Is there any documentation within the app where I can get this?
How To: Find out about the curve fit methods.

DQ153: How can I calculate the concentrations of my unknowns using standards data measured in a previous assay?
How To: Use archived standards data?

DQ154: How To: Export the report to Word containing the images embedded in the Word Document.
How To: Export the report to Word containing the images embedded in the Word Document.

DQ155: Problem importing VICTOR 384 data file.
How To: Import a VICTOR text file containing 384 well plate data.

DQ156: Problem viewing the report in WorkOut 1.5
Pressing the Report button causes WorkOut 1.5 to repeatedly flash a window indicating the report is opening

DQ157: Problem opening APR files with Lotus Works database
How to: open APR files with Lotus Works database

DQ158: How can I disable loading the VICTOR when launching WorkOut?
How to: disable loading the VICTOR when launching WorkOut?

DQ159: IC50 Example
Application Example: Inhibition Concentration of Malaria Parasites in Red Blood Cells

DQ160: How do I create an assay to calculate the Minimum Detection Limit (MDL)?
How To: Create an assay to calculate the Minimum Detection Limit (MDL)

DQ170: Error Message: Reading are not in progress - displayed after the Stop button is pressed.
Error Message: Reading are not in progress - displayed after the Stop button is pressed.

DQ171: I want to check that the R2 of the kinetic fit of each well is within a defined range.
How to: check that the R2 of the kinetic fit of each well is within a defined range.

DQ172: How can I flag kinetic points for exclusion in kinetic analysis?
How to: flag kinetic points for exclusion in kinetic analysis.

DQ173: Kinetic Range
How To: Use the Kinetic Range option

DQ174: I want to import time data which uses a different regional separator.
How to: import time data (of the format HH:MM:SS.MS) which uses a different regional separator.

DQ175: B/B0 in WorkOut 1.5
Application Example: Cortisol Assay

DQ176: Problem using two Auto-Flag transforms
Problem using two Auto-Flag transforms

DQ177: How can I refer to a group on a particular plate?
How To: Refer to a group on a particular plate.

DQ178: Importing data results in all zeroes.
Error: Importing data results in all zeroes.

DQ179: I want to set up a ratio calculation (from measurements on the same plate).
How To: Set up a ratio calculation (from measurements on the same plate).

DQ180: How can I set up a ratio calculation using data read from two separate plates?
How To: Set up a ratio calculation using data read from two separate plates.

DQ181: Where can I get the latest version of WorkOut 2.0 from?
Downloading the latest version of WorkOut 2.0.

DQ182: My PC does not have a parallel port, how can I use WorkOut 1.5?
How To: Use WorkOut 1.5 on a PC without a parallel port.

DQ183: How can I find a peak ignoring blips?
How To: Find a peak ignoring blips.

DQ184: How To: Show 3rd matrix/labels during measurements
How To: Show 3rd matrix/labels during measurements

DQ185: I get the message “The system date has been set back to an earlier date. This is not recommended, it is strongly advised that the correct date is used.” Each time I run WorkOut.
Message: “The system date has been set back to an earlier date. This is not recommended, it is strongly advised that the correct date is used.”

DQ186: I want to subtract a Blank on one plate from samples located on another plate.
How To: Subtract a Blank on one plate from samples located on another plate.

DQ187: On launching WorkOut the message appears:
Error:

DQ188: How To: Import Kinetic CSV data
How To: Import Kinetic CSV data

DQ189: How to import table based data into WorkOut 2.x parameters.
How To: Import table based data into WorkOut 2.x parameters.

DQ190: How To: Use Manta to process raw data from Tecan I-Control software.
How To: Use Manta to process raw data from Tecan I-Control software.

DQ191: How do I remove unnecessary DAQs from the Data Acquisition Wizard step?
How To: remove unnecessary DAQs from the Data Acquisition Wizard step.

DQ192: How do I launch MrunRes.exe from the command line?
How To: launch MrunRes.exe from the command line.

DQ193: Where does WorkOut store Results files?
Location of Results files.

DQ194: Does Lucy run with Stingray under XP?
Does Lucy run with Stingray under XP?

DQ195: MrunRes crashes after editing and saving an APR.
MrunRes crashes after editing and saving an APR.

DQ196: Why does the “Readings Time and Date” field always show the same time?
“Readings Time and Date” field with import data.

DQ197: How To: See the second excitation wavelength measurements whilst readings are in progress.
How To: See the second excitation wavelength measurements whilst readings are in progress.

DQ198: How to: Find the difference between two sample types on a plate.
How to: Find the difference between two sample types on a plate.

DQ199: The Organiser in WorkOut does not work?
When clicking on options in the organiser nothing happens

DQ200: How to: Access the software entries in the registry
How to: Access the software entries in the registry

DQ201: The Organiser in Manta does not work?
When clicking on options in the organiser nothing happens

DQ202: Where can I get the latest version of Manta from?
Where can I get the latest version of Manta from?

DQ203: How To: Validate the %CVs of all my samples.
How To: Validate the %CVs of all my samples.

DQ204: How To: Setup the software to print in black and white?
How To: Setup the software to print in black and white?

DQ205: Error with SKCL.DLL during installation
Error with SKCL.DLL during installation

DQ206: How to: Create custom sample type
How to: Create custom sample type

DQ207: How to: Change the number of plates to run in an assay?
How to: Change the number of plates to run in an assay?

DQ208: Are the changes I make using the Edit Protocol button saved?
Are the changes I make using the Edit Protocol button saved?

DQ209: How To: Show the average of the raw replicates in the report?
How To: Show the average of the raw replicates in the report?

DQ210: Can I insert a transform?
How To: Insert a transform

DQ211: Each time I run a protocol that automatically exports the report, how can I specify the filename for this report?
How to: Auto export the report to a specific filename.

DQ212: What should I do with my old WorkOut dongle?
What should I do with my old WorkOut dongle?

DQ213: How To: Blank correct using blanks read on a different plate?
How To: Blank correct using blanks read on a different plate?

DQ214: Can I specify a constant that is used in my transforms?
How to: Specify An expression constant?

DQ215: Can I transfer data from Excel to an Assay Protocol automatically?
How To: Transfer data from Excel to an Assay Protocol

DQ216: How To: Setup Excel for transferring data to an Assay Protocol.
How To: Setup Excel for transferring data to an Assay Protocol.

DQ217: How to: Use the Excel Add-in to transfer data to an Assay Protocol?
How to: Use the Excel Add-in to transfer data to an Assay Protocol?

DQ218: How to: Customize Excel to launch an Add-in.
How to: Customize Excel to launch an Add-in.

DQ219: How to: Use an import script to import data from Excel
How to: Use an import script to import data from Excel

DQ220: How To: Modify a protocol so that it automatically exports its data to a text file on each run?
How To: Modify a protocol so that it automatically exports its data to a text file on each run?

DQ221: How To: Remove matrix data from the report.
How To: Remove matrix data from the report.

DQ222: How To: Customise a matrix name in the report.
How To: Customise a matrix name in the report.

DQ223: What is a Matrix?
Definition: Matrix

DQ224: Can I get Remote Assistance from Dazdaq?
Can I get Remote Assistance from Dazdaq?

DQ225: Can I open WorkOut 1.5 protocols with Workout 2.x?
Can I open WorkOut 1.5 protocols with Workout 2.x?

DQ226: How can I setup my concentrations graph to plot the results on an inhibition (%) y axis?
How can I setup my concentrations graph to plot the results on an inhibition (%) y axis?

DQ227: How To: Edit a transform
How To: Edit a transform

DQ228: How To: Setup an assay to calculate the difference between measurements at two wavelengths.
How To: Setup an assay to calculate the difference between measurements at two wavelengths.

DQ229: After renaming a protocol file, on running the protocol the old name is used in the report
After renaming a protocol file, on running the protocol the old name is used in the report

DQ230: Renaming a protocol file in the organiser does not update the preview pane.
Renaming a protocol file in the organiser does not update the preview pane.

DQ231: VICTOR Measurement Information is not available after measurements have been taken.
VICTOR Measurement Information is not available after measurements have been taken.

DQ232: How To: Export a matrix of endpoint values into Excel.
How To: Export a matrix of endpoint values into Excel.

DQ233: How To: Export Data to a text file
How To: Export Data to a text file

DQ234: How To: Access the Standard Curve Fit parameters.
How To: Access the Standard Curve Fit parameters.

DQ235: How To: Access the Kinetic Fit parameters
How To: Access the Kinetic Fit parameters

DQ236: Which output variables are available from the curve fits?
Which output variables are available from the curve fits?

DQ237: How To: Create a Transform
How To: Create a Transform

DQ238: Has WorkOut 2.0 been validated?
View the validation document for WorkOut 2.0.

DQ239: Has Manta been validated?
View the validation document for Manta.

DQ240: Can I transfer data from Excel to an Assay Protocol (manually)?
How To: Save an Excel file as text for importing into an assay.

DQ241: How can I interface my instrument with your software?
How can I interface my instrument with your software?

DQ242: What is EC?
Definition: EC

DQ243: Can I recover my lost VICTOR measurements?
How To: Recover results from the VICTOR database

DQ244: Is there an easy way to setup WorkOut command line parameters?
How To: Use the Command Line Launcher tool

DQ245: How To: Setup an ELISA protocol with dual measurements?
How To: Setup an ELISA protocol with dual measurements?

DQ246: How To: Extrapolate the Standard Curve Fit
How To: Extrapolate the Standard Curve Fit

DQ247: How To: Use short date format in the results filename
How To: Use short date format in the results filename

DQ248: How To: Import Dual Label data from VICTOR
How To: Import Dual Label data from VICTOR

DQ249: How to: Move WorkOut VICTOR protocols from one PC to another?
How to: Move WorkOut VICTOR protocols from one PC to another?

DQ250: How to: Set the numerical formatting settings for more than one matrix at a time?
How to: Set the numerical formatting settings for more than one matrix at a time?

DQ251: What is the best way to learn how to get started with Manta?
What is the best way to learn how to get started with Manta?

DQ252: How To: Use the Enzyme Kinetics wizard
How To: Use the Enzyme Kinetics wizard

DQ253: How To: Use a WorkOut 2.x Import Script
How To: Use a WorkOut 2.x Import Script

DQ254: How To: Share data files between different users
How To: Share data files between different users

DQ255: How To: Change/review the concentration values of the standards
How To: Change/review the concentration values of the standards

DQ256: How To: Use GLP Features
How To: Use GLP Features

DQ257: How To: Refer to GLP fields in transforms
How To: Refer to GLP fields in transforms

DQ258: How To: Setup an assay to prompt the user for a parameter which is used in the analysis
How To: Setup an assay to prompt the user for a parameter which is used in the analysis

DQ259: “Page cannot be displayed” message in Organiser’s preview pane.
“Page cannot be displayed” message in Organiser’s preview pane.

DQ260: How to: Batch Import into WorkOut
How to: Batch Import into WorkOut

DQ261: Application Example: Interpolating Antibody Dilution Curves
Application Example: Interpolating Antibody Dilution Curves

DQ262: How To: Remove VICTOR driver from WorkOut installation
How To: Remove VICTOR driver from WorkOut installation

DQ263: Online EnVision driver
Online EnVision driver

DQ264: How To: Print a protocol
How To: Print a protocol

DQ265: How To: Import Dual Endpoint data from a Molecular Devices Reader
How To: Import Dual Endpoint data from a Molecular Devices Reader

DQ266: How To: Include VICTOR Barcode information in the report
How To: Include VICTOR Barcode information in the report

DQ267: How To: Show the calculated coefficients of each fit with the Competitive Bindings transform
How To: Show the calculated coefficients of each fit with the Competitive Bindings transform

DQ268: How To: Setup an assay with replicates on different plates
How To: Setup an assay with replicates on different plates

DQ269: How To: Number groups in multiple plate assays.
How To: Number groups in multiple plate assays.

DQ270: Images in WorkOut’s Organiser screen appear broken with Internet Explorer 7.0
Images in WorkOut’s Organiser screen appear broken with Internet Explorer 7.0

DQ271: Images in Manta’s Organiser screen appear broken with Internet Explorer 7.0
Images in Manta’s Organiser screen appear broken with Internet Explorer 7.0

DQ272: How To: Reprocess results using a different protocol?
How To: Reprocess results using a different protocol?

DQ273: How To: Use a Manta Import Script
How To: Use a Manta Import Script

DQ274: How To: Join Kinetic measurements together
How To: Join Kinetic measurements together

DQ275: Message: The Microplate Layout contains a Well Type which is not recognised.
Message: The Microplate Layout contains a Well Type which is not recognised.

DQ276: Does Manta/WorkOut 2.x/WorkOut Plus work with Windows Vista, Windows 7 or Windows 8?
Does Manta/WorkOut 2.x/WorkOut Plus work with Windows Vista, Windows or Windows 8?

DQ277: Error Message: PVXPlore8 is displayed when loading the Organiser
Error Message: PVXPlore8 is displayed when loading the Organiser

DQ278: Is WorkOut 2.0 21CFR part 11 Compliant?
Is WorkOut 2.0 21CFR part 11 Compliant?

DQ279: Can I use WorkOut to take two sets of measurements with the VICTOR?
Can I use WorkOut to take two sets of measurements with the VICTOR?

DQ280: Error Message: "The Target can not handle this type of document" in the Organiser.
Error Message: "The Target can not handle this type of document" in the Organiser.

DQ281: How to: Set the temperature/heater of VICTOR via Workout instead of Wallac 1420 workstation?
How to: Set the temperature/heater of VICTOR via Workout instead of Wallac 1420 workstation?

DQ282: A1 measurement is reset to 0 after readings are completed when using Stingray legacy drivers with Manta
A1 measurement is reset to 0 after readings are completed when using Stingray legacy drivers with Manta

DQ283: Application Example: Biotinidase Enzyme Activity
Application Example: Biotinidase Enzyme Activity

DQ284: Which plate readers work with Manta/WorkOut?
Which plate readers work with Manta/WorkOut?

DQ285: How to: Export raw kinetic data to Excel for further analysis.
How to: Export raw kinetic data to Excel for further analysis.

DQ286: Error Message: Run-time error '383' when saving microplate layout
Error Message: Run-time error '383' when saving microplate layout

DQ287: How to: Use WorkOut 2.0 and WIZARD2
How to: Use WorkOut 2.0 and WIZARD2

DQ288: Where can I get WorkOut 2.5 from?
Where can I get WorkOut 2.5 from?

DQ289: How to: Use WorkOut 2.5 and WIZARD2
How to: Use WorkOut 2.5 and WIZARD2

DQ290: How to: Automatically change the number of plates based on the imported data without user intervention?
How to: Automatically change the number of plates based on the imported data without user intervention?

DQ291: Application Example: WorkOut 2.5 WIZARD2 RIA Example
Application Example: WorkOut 2.5 WIZARD2 RIA Example

DQ292: How To: Create a new WorkOut 2.5 WIZARD2 protocol
How To: Create a new WorkOut 2.5 WIZARD2 protocol

DQ293: How To: Import Dual CPM with WIZARD2
How To: Import Dual CPM with WIZARD2

DQ294: Application Example: WIZARD2 Single Label Quantitative IEP
Application Example: WIZARD2 Single Label Quantitative IEP

DQ295: Has WorkOut 2.5 been validated?
Has WorkOut 2.5 been validated?

DQ296: Error Message: MMain5 Run time error ’76’ Path not found
Error Message: MMain5 Run time error ’76’ Path not found

DQ297: Expression Extensions
Extensions to simplify writing expressions referring to replicates across plates

DQ298: What is new in WorkOut 2.5?
What is new in WorkOut 2.5?

DQ299: How to: Create a quantitative protocol with WorkOut 2.5
How to: Create a quantitative protocol with WorkOut 2.5

DQ300: Are there any new additional transforms available for WorkOut 2.5/WorkOut Plus?
Are there any new additional transforms available for WorkOut 2.5/WorkOut Plus?

DQ301: Automating importing table data with WorkOut 2.5 R1 and /exit
Automating importing table data with WorkOut 2.5 R1 and /exit

DQ302: Scan Transforms for WorkOut 2.5
Scan Transforms for WorkOut 2.5

DQ303: Expressions referencing a common row or column group
Expressions referencing a common row or column group

DQ304: Sample IDs in the report do not match those specified
Sample IDs in the report do not match those specified

DQ305: Sample IDs in report do not match those specified (Hotfix available)
Sample IDs in report do not match those specified (Hotfix available)

DQ306: Failed to create Excel document error message when exporting to Excel
Failed to create Excel document error message when exporting to Excel

DQ307: Importing all numeric columns from WIZARD2 CSV
Importing all numeric columns from WIZARD2 CSV

DQ308: Can I back fit or evaluate a point on a standard curve fit?
Can I back fit or evaluate a point on a standard curve fit?

DQ309: GLP Late Mode
GLP Late Mode

DQ310: How to remove the audit trail?
How to remove the audit trail?

DQ311: How to: Combine data from two separate runs into one results file
How to: Combine data from two separate runs into one results file

DQ312: Images appear broken in report and Organiser preview
Images appear broken in report and Organiser preview

DQ313: How To: Include Date and Time in WIZARD2 Report?
How To: Include Date and Time in WIZARD2 Report?

DQ314: How to: Skip Audit Trail Update
How to: Skip Audit Trail Update

DQ315: Excel Export is slow with WorkOut 2.5
Excel Export is slow with WorkOut 2.5

DQ316: Problem using the Cubic Spline with a non-linear set of concentrations including a zero standard.
Problem using the Cubic Spline with a non-linear set of concentrations including a zero standard.

DQ317: Kinetic Expression Transform
Kinetic Expression Transform

DQ318: WorkOut 2.5 Installation appears to stop at 97% of Publishing Product Information stage
WorkOut 2.5 Installation appears to stop at 97% of Publishing Product Information stage

DQ319: How to: Create a kinetic assay on the VICTOR injecting between groups of measurements
How to: Create a kinetic assay on the VICTOR injecting between groups of measurements

DQ320: I'm using WorkOut with the EnVision driver but WorkOut displays: "The VICTOR server failed to start. Do you want to retry?"
I'm using WorkOut with the EnVision driver but WorkOut displays: "The VICTOR server failed to start. Do you want to retry?"

DQ321: Run-time error message when displaying Results folder from Organiser (on Polish Windows)
Run-time error message when displaying Results folder from Organiser (on Polish Windows)

DQ322: Changing one WorkOut VICTOR protocol affects another WorkOut VICTOR protocol.
Changing one WorkOut VICTOR protocol affects another WorkOut VICTOR protocol.

DQ323: Importing Table Data into Matrix Groups
Importing Table Data into Matrix Groups

DQ324: Are there any advanced tutorials available for WorkOut 2.x?
Are there any advanced tutorials available for WorkOut 2.x?

DQ325: Export to Excel crashes WorkOut on Formatting Worksheet on Excel 2007 SP2
Export to Excel crashes WorkOut on Formatting Worksheet on Excel 2007 SP2

DQ326: WorkOut 2.5R2 crashes when importing Sample IDs data
WorkOut 2.5R2 crashes when importing Sample IDs data

 Search again

  Evaluate
  Download software now:

    WorkOut 2.5
    Manta
    Stingray
  Support
    Search Knowledge Base
    Browse Knowledge Base
    Submit a query